Brief introduction of cable drum

Cable drum is a cable winding device to provide power supply, control power supply or control signal for large scale mobile equipment. It is widely used in Port Portal Crane, container crane, loading machine, tower crane and other similar conditions of heavy machinery and equipment.

Cable reel main products are the following forms: weight type, torque motor type, hysteresis type, variable frequency drive type.

Cable drum is divided into: spring driven cable drum and motor drive cable drum.

Spring driven cable drum for the control of the roll up and release of cables, mainly used for cranes, stacking devices or waste water treatment technology, etc..

The spiral spring driving drum is more reliable and the price is lower, which can be replaced with the electric drum. Especially for mobile devices without internal power supply.

Drive flange spring drum made of galvanized sheet metal is made, and the flange of the outer edge after the crimping process. The reel core is made of metal plate, the outer layer is protected by the polyester coating, which can be very good to prevent the corrosion.

Conditions of use

Not more than 2000 meters above sea level.

Ambient temperature: -+45 C -20 C

No corrosive gas and dust in the rain, splashing and place of work.

The maximum vibration condition of the installation site is: 5-13HZ, displacement 1.5mm; 13-150HZ, the vibration acceleration is 10m/s2.

Protection class IP54 for electric box.